UPS F.905
SCALE INHIBITOR
GENERAL DESCRIPTION :
The UPS F. 905 is a liquid boiler feed water treatment which contain complex phosphates and blends of polymeric dispersant, phosphates and anti-foam agents. The UPS F. 905 is designed for specific operation need to provide superior deposition against contaminants typically encountered in boiler operation. The contains products which are formulated with the proper polymer/phosphate ratio and are particularly effective against hardness and metallic deposition.
USAGE :
Dosage requirement of UPS F. 905 depends on a number of boiler parameters and the chemical quality of the feed water. Your UPS Technical Service Representative will provide treatment recommended after thorough chemical analysis of the feed water and surveys of the boiler operation conditions are made
TYPICAL PHYSICAL PROPERTIES
Appearance………………………………Brownish liquid
pH (Neat)………………………………………12.5 – 13.5
Specific Gravity (@ 25º C).…………………….15 – 1.52
Solubility…….……….……………… miscible with water
REGULATORY STATUS :
The UPS F. 905 contains products which have been formulated in compliance with subpart D, section 173.310 of the FDA food Additive Regulations and authorized by the USDA for use in Federally Inspected Meat and Poultry Plants.
HANDLING AND STROGES
This product may cause severe eye and skin irritation. Harmfull if swallowed. Avoid eye and skin contact. Wear eye protection and rubber gloves at all times when handling these products. Avoid breating of dust or vapors. Keep out of reach of children. Store in a cool, dry place away from strong oxidizing agents. In case of eyes contact, immediately flush eyes with large amounts of water for 15 minutes and seek medical attention. For skin contact, wash effected area with soap and plenty of water.
